Power Supply APS-7303L Managing
Laboratory will be available in:
In this virtual laboratory you will be able to learn the capabilities of the remote control of AKTAKOM APS-7303L laboratory power supply and AEE-2085 commutator. Both devices have built-in WEB interface through which the control is made. The control results are seen through the video camera (with some delay due to video signal transmitting).
There are 3 lamps installed as a load. To change the load there should be commutation by the switch (X1 -> Y1, Y2, Y3) used.
AKTAKOM ADS-2061MV oscilloscope (in closed input mode) and AKTAKOM ABM-4081 multimeter are switched for the power supply output. These devices demonstrate the picture and values of the ripple and noise output levels when operating at different loads. The current control results are available to everyone, the control is made by one authorized user only.
Measuring bench scheme
Web-Camera for online broadcast of the bench
Timer that displays the remaining time of laboratory operation availability or the time remaining till the laboratory is free.
Laboratory bench description
Buttons to open the web interfaces of the laboratory devices
When the timer sends a message informing that you may start the operation you should select the device and open its web interface by pressing the button with the appropriate device name.
Modal window with the device interface will be open.
After completing all necessary operations, close the window and you may see the result in the camera image.